258 rods and crank
01-10-2014, 06:35 PM
#1
Member
Thread Starter
Join Date: Dec 2009
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
258 rods and crank
By way i can identify 258 rods and crank? Thinking about buying a set from a guy on CL.
Also, what's a fair price? Said he was going to make furniture out of them.....
Also, what's a fair price? Said he was going to make furniture out of them.....
01-10-2014, 09:20 PM
#2
Member
Thread Starter
Join Date: Dec 2009
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Ok, been doing some reading up on this subject. Looks like I'm going to have to buy some calipers possibly.
Also was looking at a vintage 258/4.2 manual and it had a section with special engine codes. There will be a letter stamped on the block between the coil and distributor to identify an over or under sized component. Was this common?
Also was looking at a vintage 258/4.2 manual and it had a section with special engine codes. There will be a letter stamped on the block between the coil and distributor to identify an over or under sized component. Was this common?
Thread
Thread Starter
Forum
Replies
Last Post
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
10-29-2015 01:49 PM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 12:10 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
TheDesertlights
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-28-2015 11:54 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
09-25-2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)