1998 Jeep cherokee wiring problem
#1
Newbie
Thread Starter
Join Date: Aug 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L
1998 Jeep cherokee wiring problem
My problem all started when i installed an aftermarket cruise control kit...
i was installing it and when i drilled trough my firewall i drilled into the main wiring harness and shredded most of the wires. so i removed the harness soldered the wires back together and am positive they are all a match i checked 3 times.
my car starts my cruise work but when i turn my lights on my dash light does not turn on...
now here's where i get really confused... if i start my car with my car starter the dash lights up but if i tap the break or use my key it doesn't work.
any ideals?
Also i want to connect my neutral safety switch for my cruise but do not know what wire to use one the nss harness..
Thanks for all help
i was installing it and when i drilled trough my firewall i drilled into the main wiring harness and shredded most of the wires. so i removed the harness soldered the wires back together and am positive they are all a match i checked 3 times.
my car starts my cruise work but when i turn my lights on my dash light does not turn on...
now here's where i get really confused... if i start my car with my car starter the dash lights up but if i tap the break or use my key it doesn't work.
any ideals?
Also i want to connect my neutral safety switch for my cruise but do not know what wire to use one the nss harness..
Thanks for all help
Last edited by joel4688; 08-26-2011 at 07:47 PM.
#2
Newbie
Thread Starter
Join Date: Aug 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L
Figured one problem out but caused another
so i Figured one problem out but caused another...
the reason the dash light was not working is 2 of the pins in the wiring harness where broken so i bypassed the connector and connect to wires permanently... now all my dash gauges are dead and my car wont start at all... any ideals?
the reason the dash light was not working is 2 of the pins in the wiring harness where broken so i bypassed the connector and connect to wires permanently... now all my dash gauges are dead and my car wont start at all... any ideals?
Thread
Thread Starter
Forum
Replies
Last Post
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-26-2019 06:30 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-04-2015 10:14 PM
csmith237
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-24-2015 12:54 PM
Kevin Icenhour
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-21-2015 08:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)