00 XJ with a 94 Toyota Land Cruiser OEM brush guard?
03-28-2018, 01:05 AM
#1
Newbie
Thread Starter
Join Date: Mar 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
00 XJ with a 94 Toyota Land Cruiser OEM brush guard?
I’m looking to mount a ‘94 Toyota Land Crusier OEM brush guard to my ‘00 XJ sport but I’m not sure if it will mount wo the XJ cross member properly like in the LC. Has anyone ever looked into this or can figure out if it would work? The XJ is 69.5 inches wide & the brush guard is 72” inches wide with mounts 28 inches on center using 17mm head bolts. will i need to modify the front cross memeber to make this work? or is it stock compatible? I’m buying it used & getting there is a bit of a drive. Help?
03-28-2018, 09:32 AM
#2
Member
Join Date: Oct 2017
Location: New Mexico
Posts: 227
Likes: 0
Received 10 Likes
on
8 Posts
Year: 1998
Model: Cherokee(XJ)
Engine: 4.0 L I6
If you have a welder, a drill, metal, and a cutoff wheel you can do it. Probably no one has ever done that b/c it seems like on this forum toyotas and jeeps are like oil and water... even though when I go with guys in toyotas the jeeps are always the ones that break...
03-28-2018, 06:26 PM
#3
Seasoned Member
It looks a lot like the Manik brush guard that used to be available.
This page has a link for Grand Cherokee installation.
http://www.jeepforum.com/forum/f11/1...guard-2669130/
I have a similar looking guard on my 98 XJ. Don't know who the maker was.
It was on the Jeep when I bought it used in 2002. It is held on with two
bolts that screw into into the top of the bumper and two vertical nutted
bolts underneath.
This page has a link for Grand Cherokee installation.
http://www.jeepforum.com/forum/f11/1...guard-2669130/
I have a similar looking guard on my 98 XJ. Don't know who the maker was.
It was on the Jeep when I bought it used in 2002. It is held on with two
bolts that screw into into the top of the bumper and two vertical nutted
bolts underneath.
Last edited by BwanaBob; 03-28-2018 at 06:34 PM.
03-28-2018, 07:02 PM
#5
Newbie
Thread Starter
Join Date: Mar 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Thanks the for advice!
It looks a lot like the Manik brush guard that used to be available.
This page has a link for Grand Cherokee installation.
http://www.jeepforum.com/forum/f11/1...guard-2669130/
I have a similar looking guard on my 98 XJ. Don't know who the maker was.
It was on the Jeep when I bought it used in 2002. It is held on with two
bolts that screw into into the top of the bumper and two vertical nutted
bolts underneath.
This page has a link for Grand Cherokee installation.
http://www.jeepforum.com/forum/f11/1...guard-2669130/
I have a similar looking guard on my 98 XJ. Don't know who the maker was.
It was on the Jeep when I bought it used in 2002. It is held on with two
bolts that screw into into the top of the bumper and two vertical nutted
bolts underneath.
Thread
Thread Starter
Forum
Replies
Last Post
RedStar
Other Vehicles. Other Jeep models & cars and trucks of other makes
22
10-05-2016 06:25 AM
BIGISLANDHIKERS
Other Vehicles. Other Jeep models & cars and trucks of other makes
7
10-21-2011 10:46 AM
sportrider
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
04-03-2010 05:37 PM
mike
Other Vehicles. Other Jeep models & cars and trucks of other makes
24
02-16-2009 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)