Anyone have pictures our experience with warrior products tubular doors for the xj, or any other companies that make them? Trying to decide if I want to go this route or not.

 

They cost a butt load! Ever consider making your own? My brother is an electrician and he helped me build some out of EMT. Used a simple gate latch to keep them closed. They're strong enough, won't help much in a side collision, but plenty string enough to keep you from falling out. I only built mine to keep the cops happy. I prefer doorless

 

That's pretty sweet!

 

Tomken makes a set fronts are 265 from jeephut but they are a vendor on here see what kinda forum discount you can get.A link http://thejeephut.com/front-tube-doo...l#.UI-7NoYeXZc

 

mine. they were a prototype built by AJ's Offroad a long time ago. i will be redoing the latches this winter with some sort of spring mechanism

 

My biggest issue is committing to these type of doors, I don't know if I want to make the permanent change, I wish the xj was as easy to switch doors as the others....

 

Cut the hinges and they are.

 

yeah most cut the hinges. i can have my doors swapped within a minute for each.

 

And put in trailer disconnects for the wires

 

Is there a write up on how to do that?

 

Yeah check out the write up section for how to cut the hinges and then there is another write up for a set of door plugs from a ZJ like I used

 

Any special tips or things I should watch or be careful about

 

If you have an air compressor get yourself a cheap air hammer, makes things FAR easier.

Also drill the holes the hinge pins go in out to 1/4 inch. Its slightly bigger than they are already and makes putting the doors back on easier. Also helps to cut some lengtj off the top hinge pin.

 

heres a good write up

https://www.cherokeeforum.com/f51/97...stment-146651/

 

Awesome thank you! I already have an air hammer when all my upper shock mount bolts broke. Lol