XJ Lift/Tire Setup thread
#1006
Seasoned Member
3.5 Metalcloak lift with 33x12.5. Napier flat flares. 4" BS wheels. No rubbing but it is very close and will have to lift a little more when I get a winch
#1007
Member
Join Date: Oct 2017
Location: OKC
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Engine: 6 CYL HO
#1008
Seasoned Member
I have deleted rear sway bar and disconnected the front sway bar. Have not had alignment checked and the caster might need tuned. Still don't have license on it but have drove it short distances to the gas station and it ain't bad. Got it up to around 55 and started to get a little DW but I'm a 40 to 45 mph kinda man anyway. I haven't done a lot to the front end but ball joints and unit bearings appear good. Bottom line is it still needs some work that is done as needed. Took it out on a trail ride after airing down the tires with 4 people and a dog and it rode great. Kept it in 4lo and was able to stay in second gear for the most part but used first a lot. Def will need gears and lockers. Sorry for the long post but as you can tell I'm very happy with it, just wished I had more money to sink into it.
#1010
No, I don't lick fish.
#1011
Plasti dip
Yes .. I dip it with camo tan. First time. After I started was pretty easy. The most important thing was to take your time and prep it right. No rush. It will make the difference in the outcome.
I ordered the kit with spray gun and got primer grey, cano tan pain and clear coat.
I would do do it again.
I ordered the kit with spray gun and got primer grey, cano tan pain and clear coat.
I would do do it again.
#1012
No, I don't lick fish.
Yes .. I dip it with camo tan. First time. After I started was pretty easy. The most important thing was to take your time and prep it right. No rush. It will make the difference in the outcome.
I ordered the kit with spray gun and got primer grey, cano tan pain and clear coat.
I would do do it again.
I ordered the kit with spray gun and got primer grey, cano tan pain and clear coat.
I would do do it again.
#1018
No, I don't lick fish.
#1019
Junior Member
Join Date: Apr 2012
Location: Austin, TX
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
New 3" RC series 2 with new leaf springs.
15x8 rim with 4"backspace, currently on worn out 29s (no trim, duh)..
Needs bigger tires. I am thinking 30x9.5, but I wanted to ask one last time to anyone on here with the same or very similar setup running 31x10.5 whether their tires rub at full turn and/or full flex with sway bars disconnected. I don't want to trim anything but I don't wanna rub either. Ever.
15x8 rim with 4"backspace, currently on worn out 29s (no trim, duh)..
Needs bigger tires. I am thinking 30x9.5, but I wanted to ask one last time to anyone on here with the same or very similar setup running 31x10.5 whether their tires rub at full turn and/or full flex with sway bars disconnected. I don't want to trim anything but I don't wanna rub either. Ever.
#1020
New 3" RC series 2 with new leaf springs.
15x8 rim with 4"backspace, currently on worn out 29s (no trim, duh)..
Needs bigger tires. I am thinking 30x9.5, but I wanted to ask one last time to anyone on here with the same or very similar setup running 31x10.5 whether their tires rub at full turn and/or full flex with sway bars disconnected. I don't want to trim anything but I don't wanna rub either. Ever.
15x8 rim with 4"backspace, currently on worn out 29s (no trim, duh)..
Needs bigger tires. I am thinking 30x9.5, but I wanted to ask one last time to anyone on here with the same or very similar setup running 31x10.5 whether their tires rub at full turn and/or full flex with sway bars disconnected. I don't want to trim anything but I don't wanna rub either. Ever.