These are hard to find. Where can I buy a pair online? Thanks!

 

Napa drivetechs

 

We’re here to help, but you must understand that all Jeeps are not the same.
In order for us to give you more accurate advice and help.

Year
Model
Engine
Transmission
Transfer case

 

I've installed 2 sets of these (in 2 separate XJs). No complaints other than they are a little bit more work than just slapping them in. They reuse the factory metal body. You could also get rubber mounts ($22 for the pair on ebay) & spray them with silicone to protect them from oil breaking them down.
They are available in black too.
http://m.ebay.com/itm/Energy-Suspension-2-1104R-Red-Motor-Mount-Set-for-Jeep-Wrangler-Cherokee-/400522026764?hash=item5d40f91f0c%3Ag%3AQfEAAOxyg6BR0z3%7E&_trkparms=pageci%253Afe0e01f4-82ae-11e6-b38d-005056bb1835%257Cparentrq%253A5e89e53f1570a6a8c2027240fffeabf5%257Ciid%253A26

 

Duh, my bad...

Year: 2000
Model: Cherokee XJ
Engine: 6 Cylinder 4.0
Transmission: Auto
Transfer case: ??

 

If your inside the usa any auto parts store has them,Outside the usa rockauto.com

 

I had a pair of those and the driver side melted due to close proximity to exhaust.

Have found that Omix-ADA brand is one of the better options for stock replacement. $12 each, left and right motor mount are identical.

 

I got mine from rockauto. old ones looked like this.

 

Anchor brand are good too.

 

After experiencing their transmission mounts, I personally would never endorse them haha

 

I'm sure you've heard that the OEM design is poor and, coupled with the equally poor design of the exhaust manifold, causes the manifold to crack.
I'm sure you also expected at least one person to try to get you to look at Brown Dog When I rev'ed the engine by hand from the engine bay with my old OEM mounts, the engine would rock (ie: poor power transfer). Now that I've installed BD, the front of my Jeep rocks.

 

Stinky Fab Offroad makes some bomber mounts, same kind as Brown Dog. I installed some stock replacement mounts a while ago, only to find out that they where bad after just 3 months. I have a complete drivetrain mount package, engine mounts and transmission mounts, and honestly couldn't be happier.

http://www.stinkyfab.com/heavy-duty-...ckages-xj.html

 

I'm getting a really bad idle vibe while in gear after I installed a 1" TC drop spacers. Hopefully, a new pair of motor mounts will fix it. I Just installed a new transmission mount too but that didn't work.

 

Brand used?

 

DEA A5346 Transmission Mount from Amazon.

Just ordered Anchor 2572 Engine Mount from Amazon.