What did you do to your Cherokee today?
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Tranny Pan Leaks
Finally fixed the leaking AT pan. I had to go to my local hardware store and get some M6-1.0 x 15mm bolts to replace the OEM ones as a number of them were so threadbare that they would not grab on at all. Disassembled and reassembled using said shiny, grade 8.9 bolts and replaced the crappy Chinese gasket with a Fel Pro one and some black ATV just for good measure.
Side note, it's getting difficult to find these gaskets in central Florida. I had to special order an $8 gasket and I waited 3 days for it. I found a few online for $11, and I ordered them for next time.
Anyways, new gasket and hex bolts that aren't 21 years old solved the pan seal leak. Dry as a freaking bone. Jeep shifts like new. Solenoid replacement worked better than I ever expected.
Now to clean up the 2 gallons of Dex/Merc that has soaked, then baked into my driveway due to user error and two left feet...
Side note, it's getting difficult to find these gaskets in central Florida. I had to special order an $8 gasket and I waited 3 days for it. I found a few online for $11, and I ordered them for next time.
Anyways, new gasket and hex bolts that aren't 21 years old solved the pan seal leak. Dry as a freaking bone. Jeep shifts like new. Solenoid replacement worked better than I ever expected.
Now to clean up the 2 gallons of Dex/Merc that has soaked, then baked into my driveway due to user error and two left feet...
Seasoned Member
Join Date: Sep 2014
Location: Pasadena, Md.
Posts: 353
Received 91 Likes
on
67 Posts
Year: 94
Model: Cherokee (XJ)
Engine: 4.0 H.O.
Huh. Not a big fan of lift blocks in general, but never actually thought about the sway bar interfering.
The rear sway bar really doesnt do much good anyhow. Pulling it will increase flexability and give you a smoother ride. Difference in road handling is barely noticable.
And you wont eat another tire!
The rear sway bar really doesnt do much good anyhow. Pulling it will increase flexability and give you a smoother ride. Difference in road handling is barely noticable.
And you wont eat another tire!
THE Admin
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Put the vent visors on to help in this hot rainy weather..
Seasoned Member
Join Date: Oct 2016
Location: Belleview, FL
Posts: 314
Received 148 Likes
on
93 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Yeah, I got a feeling I'll be doing that real soon myself ! Rather than pull the pan twice, I'm going to just torque the pan to specs and wait till I get new solenoids, do it all at once. New gasket, filter and solenoids. Got to many irons in the fire at the moment . What year is your XJ ?
CF Veteran
Join Date: May 2015
Location: San Antonio, TX
Posts: 1,472
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L H.O.
I love tinted glass, gotta have it here in S Texas. But i really do hate tinting glass. Its frustrating, time consuming... And my god the smell when you're peeling off the old factory tint? That is special.
Got the hatch area done, thats enough fun for one day.
And took her on her first highway run. Damn thing drives like a dream! No shimmies shakes or wobbles, just smooth as silk.
And, not mine... and not a Cherokee, lol, but got the bumper and winch set up on the now-running MJ.
Couldn't bring myself to chop the fenders & flares on a 1-owner '86 MJ, so i carefully notched out the bottom of the bumper to clear everything.
The owner was very appreciative, as he had no idea that wouldve been part of the install process.
Got the hatch area done, thats enough fun for one day.
And took her on her first highway run. Damn thing drives like a dream! No shimmies shakes or wobbles, just smooth as silk.
And, not mine... and not a Cherokee, lol, but got the bumper and winch set up on the now-running MJ.
Couldn't bring myself to chop the fenders & flares on a 1-owner '86 MJ, so i carefully notched out the bottom of the bumper to clear everything.
The owner was very appreciative, as he had no idea that wouldve been part of the install process.
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Solenoids
It's a 98 Sport. Your situation should be identical I think. If you look on Amazon you'll find the set that I got, which includes all 3 solenoids, a screen and a (crappy Chinese) gasket for $80 or $90, I can't remember. For reference, the local big box auto parts store here wants over $200 PER SOLENOID. It was a no brainer and they work great. Get the Fel Pro gasket "TOS 18685". You'll thank me later.
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Red Calipers!
I just had to do this today, to see how it looked!!! Finished rebuilding the front calipers and installed them along with the rotors,,,
Passenger side.
Sprayed the hubs with white lithium grease !
Red, rebuilt and fully loaded with Akebono Ceramic disc pads !
Will update again tomorrow night !!!
Passenger side.
Sprayed the hubs with white lithium grease !
Red, rebuilt and fully loaded with Akebono Ceramic disc pads !
Will update again tomorrow night !!!
Seasoned Member
Join Date: Oct 2016
Location: Belleview, FL
Posts: 314
Received 148 Likes
on
93 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
That looks great, man. Wish my rig was that squeaky clean!
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Solenoids
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
That is the one that I got. It is made by Autex.
That is the one that I got. It is made by Autex.
Seasoned Member
Join Date: Oct 2016
Location: Belleview, FL
Posts: 314
Received 148 Likes
on
93 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I'm actually glad you found a better deal, but just out of curiosity, how much would it cost for you to get it in 2 days?
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Probably more. But I order nearly all of my parts in advance on line,,, EBAY baby !!! Saves me a ton !!! I have a list in my head. I watch and shop every night for deals !!! I just got two sets of Spicer ball joints, NIB, $60 shipped !!! That's more than .50 cents on the dollar !!! I plan all of my projects in advance. Right now, I'm watching for parts for my lift and exhaust system. Rome wasn't built in day.
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
Another one bites the dust !
So, how did you do on it, if I may ask ? I did this the other day,,, so I guess it still counts?
I just had to do this ,,,
Because of this !!! http:// I'm not usually a sticker person,,, but I just had to do this !!!
My very first sticker !!! That's my baby girl, Miss BAILEY !!! She loves the Jeep ! Always rides shotgun with me !!! Dudes, you need to get one, they're chick magnets !!!
I just had to do this ,,,
Because of this !!! http:// I'm not usually a sticker person,,, but I just had to do this !!!
My very first sticker !!! That's my baby girl, Miss BAILEY !!! She loves the Jeep ! Always rides shotgun with me !!! Dudes, you need to get one, they're chick magnets !!!
Last edited by CRLAMBERTJR; 08-21-2018 at 08:41 AM.