VHT Nightshade
hello everyone im looking to tint my taillights. from what ive read vht is the best stuff to use but im a little unsure on how to do it. yes ive searched but everyone does it a little different and i dont want to screw it up im thinking: first-wetsand with 2000grit sandpaper
second- wipe with paint thinner third- spray vht. light coats 10minutes apart fourth-clear waiting 5 minutes between coats fifth- wetsand with 2000 grit sixth- rub with a compund and then polish? does that sound right? and i dont need to hear the tinting your tailights is dumb talk :help: |
heck i just cleaned my light and sprayed it on there! still around 2 year later and same as when just put on! just remember-more coats=darker tint
|
You may do what ever you want to do to your vehicle, I my self wouldn't tint them. Because I don't want to give any reason for the mostly unpleasant police dept. To pull me me over. They are suppose to be visible at a certain distance at night. And I certainly don't want to argue with him, What his interpation of that law is.
|
Originally Posted by 91 limited owner
(Post 2034774)
You may do what ever you want to do to your vehicle, I my self wouldn't tint them. Because I don't want to give any reason for the mostly unpleasant police dept. To pull me me over. They are suppose to be visible at a certain distance at night. And I certainly don't want to argue with him, What his interpation of that law is.
|
1 Attachment(s)
Sprayed mine with Windex, then did a few coats of VHT, came out great. Been through a lot of mud and washes and still looks great. Didn't use a clear coat, either.
Attachment 411156 |
i dont plan to completely black them out. my jeep is black and the stock ones stand out so much since i have everything else black so i just want to put a few light coats on. can anyone else hlep me out?
|
1 Attachment(s)
No need to do all that sanding all i did on mine is sand them with 300 clean, with rubbing alcohol 2 or 3 light coats then clear.
Here is a picture of my corner lights.You can still see the original color of the lens and the light shine throw just fine and i havent killed any babys yet like some people will tell you lol |
thanks guys. just from what ive read online and seen on youtube it looks like for the best results i should scuff them up first. anyone else know anything? i wanna get the stuff tomorrow.:head:
|
I wetsanded my old ones and they ended up coming out mattte looking. Its also kinda hard to do even coat per coat. The way I did it was 1 coat but side to side even spraying until it got as dark as I wanted. Would have came out nicer if I didnt wetsand.
|
thanks maybe i shouldnt wetsand then. :help:anyone else have any input? want to get this done today yet
|
I did this on my ZJ, tails and corners, I did no sanding or clear coats and it turned out awesome. Just make sure you clean them before you start spraying
|
1 Attachment(s)
Attachment 145367
I wet sanded with 1500 to help get letters and such (part numbers, etc stamped into the lamps more so the front markers than the tails.) Then wet sanded with 2000 Cleaned them really good with tar remover prep stuff I initially tried following directions and doing multiple coats. And no matter what I did it turned out splochy. So I got all the tint off with thinner. And did one very light spray let it dry a lil til it was still tacky. Then I layed down one thicker coat. Just be careful not to make it too thick because it won't work like its supposed to, and it will run. Once it was on and dry to touch I hit them all with clear coat including the taped off reverse lights. This was with Duplicolor Lens tint btw. Its really the same ****, its pretty much just black candy paint with adhesion promoters for plastic. |
I did my front markers and amber on my tails with vht.just cleaned and then sprayed one coat side to side til darkness you desire.also did my 05 crown vic 2 almost three years ago and still looking good.and the vic gets two pressure washes a week.just cleaned and sprayed that simple.
|
ok guys i purchased the vht and a duplicolor perfect match clear so i will prolly do them tomorrow. do i wet sand them or not? haha im still not sure.:help:
|
4 Attachment(s)
I didnt sand at all. Just cleaned them and sprayed. Turned out very nice. Didn't even take em off. Lol
|
All times are GMT -5. The time now is 10:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands