Problem I have...
So i repaired the speedometer cable inside to the gearbox? or transfercase it spins when i turn it but when i am driving it, it is still not showing a speed i am not lost... i will post a pic of what i am talking about.....:brickwall:
http://img442.imageshack.us/img442/6...epproblems.jpg |
http://img339.imageshack.us/img339/4443/jeepgear.jpghttp://img109.imageshack.us/img109/7889/jeepgear2.jpg
the gear is fine and there are 2 notches by my thumb and my index is that where the stock went? if so what could it be i am stumped now...... |
so i cleaned it up and it is not working meaning next step is rebuilding the transfer case or get a new one... this does not surprise me at all tho...
|
are you sure its pushed all the way in?
Have you tried a new or different sensor? |
so i thought about it and i decided that i am going to go over to the junkyard and just pick up another one i found the rebuild kit with all the stuff i need and it is 749 so... i am just going to pick one up from the junk yard
|
Originally Posted by Bryan98XJ
(Post 2100129)
are you sure its pushed all the way in?
Have you tried a new or different sensor? |
just curious how you know its still good?
Did you try spinning it with a drill and see if it moves on the dash? |
Originally Posted by Bryan98XJ
(Post 2100178)
just curious how you know its still good?
Did you try spinning it with a drill and see if it moves on the dash? |
All times are GMT -5. The time now is 09:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands