Ideas for my xj, lifts and tires? On a tight budget
#1
Member
Thread Starter
Join Date: Jan 2011
Location: Bridgeport, tx
Posts: 195
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0 High Output
Ideas for my xj, lifts and tires? On a tight budget
Hey guys I just bought a 2 door 4x4 stock. and wanted some ideas on lifts and tires the best for the price. I was thinking a rough country 3" but didn't know if I had any better option for $250. Or let me know about a good budget lift.
#2
CF Veteran
Join Date: Jun 2009
Location: Denver, CO
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
I've heard good stuff about zone off road..
If you want to piece your lift together, you can avoid getting shocks in the lift kit, and just put some shocks from a yj wrangler in front and an mj commanche in back. they are about 2-3" longer and will work w/a lift.
If you want to piece your lift together, you can avoid getting shocks in the lift kit, and just put some shocks from a yj wrangler in front and an mj commanche in back. they are about 2-3" longer and will work w/a lift.
#3
I did the 3 in rc lift... but added 1.5 inch coil spacers up front and 1.5 inch drop shackles in the rear total spent was 350.
Butts for tires.... they are just plain expensive.... I say a set of 31s for a 3 inch and 33s for 4.5 but that's just me Haha.
Butts for tires.... they are just plain expensive.... I say a set of 31s for a 3 inch and 33s for 4.5 but that's just me Haha.
#4
Member
Thread Starter
Join Date: Jan 2011
Location: Bridgeport, tx
Posts: 195
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0 High Output
How is the ride on the RC lift, you I was thinking 30s or 31s. but my brother has a 31s and the rub on a 3" lift and I don't want to cut the finders
Thread
Thread Starter
Forum
Replies
Last Post
Outlaw Star
MJ Comanche Tech. Stock & Modified.
51
06-13-2022 01:54 PM
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)