Ideas to cover holes in console?
#1
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Memphis
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0l
Ideas to cover holes in console?
So the po of my jeep put in these switches for fog lights and bypass on the stereo.... Which I don't have either of them anymore And neither one of the switches worked in tbe first place.
I can't find new switches that match these... Which leaves me with the ugly holes. Any ideas to cover em up? Or any links to a set of switches that would look/fit good and get rid of these holes?
I can't find new switches that match these... Which leaves me with the ugly holes. Any ideas to cover em up? Or any links to a set of switches that would look/fit good and get rid of these holes?
#3
CF Veteran
almost any switch will fit in there. they're pretty much all the same size to fit universal switch plates.
why not wire up some lights and use those spots for the switches?
either that or just get a new console from the junk yard.
why not wire up some lights and use those spots for the switches?
either that or just get a new console from the junk yard.
#4
CF Veteran
Join Date: Jun 2010
Location: Ohio
Posts: 2,117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 stock
1) Make a cover plate out of metal or thin plexi, paint and glue down....
2) Put duct tape underneath. Fill holes with epoxy, wait for it to dry and scratch some texture to try to blend into rest of console then paint console a flat color.
Those are the only 2 ideas I have...
2) Put duct tape underneath. Fill holes with epoxy, wait for it to dry and scratch some texture to try to blend into rest of console then paint console a flat color.
Those are the only 2 ideas I have...
#5
CF Veteran
#6
CF Veteran
Join Date: Jun 2011
Location: S.E. Tx
Posts: 1,845
Likes: 0
Received 2 Likes
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6 firepower ignition, cat-back w/ magnaflow muffler, poweraid tb spacer, optima blue top
Looks like a good place to mount a window punch/seatbelt cutter, always good to have one close by.
#7
CF Veteran
Thread Starter
Join Date: Apr 2011
Location: Memphis
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0l
Originally Posted by xj wheeler
Looks like a good place to mount a window punch/seatbelt cutter, always good to have one close by.
Last edited by IZAREBL; 10-05-2011 at 03:09 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)