spikexj2d92

So my 1992 xj was all white and i wanted to give it a trim so i did the front and back bumps and side and fenders it looks nice and i applied the uav top coat as well so it stays pretty shinny black. I like it... Pretty cheap as well i think i spent like 80$ total on it.

spikexj2d92

This is just a prep pic i just sanded it like a like scuffed it up and then used some self etching primer worked good.


https://www.cherokeeforum.com/member...-jeep-prep.jpg

spikexj2d92

biggoofy

how is this fabrication?

spikexj2d92

idk probably isn't i was just posting it to show people what it looks like and how it came out if anyone was curious about using it.

biggoofy

this belongs in the Technical Write-Up/How To Section or a pic thread

spikexj2d92

to late my bad

Bimmer_2002

4-door version

greenzj

bought the gallon 100 doller kit from autozone, did mine fender wells and frame and everything with one gallon still have half gallon left its on thick and i hit stuff all the time wheelin stuff holds up very very well.. I must say though after mudding and pressure wash a couple times shinny goes away it turns dawl which i like better than the gloss.. so going mudding this weekend lol btw nice jeep whites my fav color on a cherokee

spikexj2d92

That looks so sick on those bushwackers.... Ya i only have my factory fenders. But this weekend i took my grill off and the side trims and i sanded them and used that bed liner spray can to do those and it actually looks nice not as ruff as the hur, but it has a nice feel to it. Thanks for the feed back and all.

spikexj2d92

Also where did u get those tail light covers the blockers or whatever there called.

greenzj

there a bit salty for guards but heres the link may be able to make them cheaper, but there tough and dont bend when i snag stuff

http://4wheelonline.com/Products.asp...roductID=72752

greenzj

thats what i used on my swing gate and underbody and tail lights guards nice stuff but 10 dollers a can

BOOMroasted

looks good but can't this stuff get nasty when it's out in the sun?

XJSETH

this belongs in cherokee chat...no fabrication involved at all...