welding cart start
#47
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#48
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
ok i got the axle to put on the rear wheels. here is a pic of the stuff i got
and wheels mounted and the shelf for the welder lowered
and wheels mounted and the shelf for the welder lowered
#49
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
and now a pic with it pretty much finished
it has a slight rake the front is 26 inches tall the rear is 24. that way i can see it easier when standing up and in use. so it is basically done i just need to get some accessory figured out. like wire spools to wrap the gun and clamp around and plier holder and what not. i hoped this helped some see how easy it is to make some basic stuff and that if i can do it any body can do it.
it has a slight rake the front is 26 inches tall the rear is 24. that way i can see it easier when standing up and in use. so it is basically done i just need to get some accessory figured out. like wire spools to wrap the gun and clamp around and plier holder and what not. i hoped this helped some see how easy it is to make some basic stuff and that if i can do it any body can do it.
#51
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
thank you i said i would do it if the fab section was a go. so i kept my word and built it. it is not 100% done but close enough for now. i will post more as i do it. plus i still have to cut the sides down about 10 inches to make it look nicer
#53
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It was to top heavy so I droped it 10 inches and that brought the overal height to just about 2 foot tall. Much more stable.
#54
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
ok guys i have made a little more progress on this i have primed it and i am just about to painting it. i will post pics later after dinner of it primed and i got a small shrinker stretcher to make the handle and maybe a few other little accessorys for it. pics later tonight or first thing tommarow and who ho new fab section is here so start building everybody ha ha new smiley
#56
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
ok all painted and loaded up. time to start a new project.
painted flat black
welder loaded in and accessory's loaded in on the bottom
painted flat black
welder loaded in and accessory's loaded in on the bottom
#59
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
ha ha yup but they are still gay looking so I may just paint them to match the rest of the cart. But at the price I got um for I could not pass them up.
Thread
Thread Starter
Forum
Replies
Last Post
xjmachine
Fabrication & builders section.
25
09-27-2015 08:22 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)