Project Stacey-The Seats
I have another question for all of you....
I have also stripped out the interior and now need to get the driver seat back in. However when i took it out I snapped the left back bolt. Not sure how to go about fixing it but i need to get her back in. I was trying to think of options such as welding, leaving that bolt undone, or placing new plates welded to the floor and then bolting the seat to the new plates.... I wanted to know what i should be doing for it to be safe to drive on the road and off road and so that i could replace the seat in the future. |
i did the same thing to both the driver side and passenger side i just letf them out and tightend the rest real good and i havent noticed anything so i say for now leave them alone but in the future (when you replace your floors) fix the bolt hope i helped
|
Drill it out and use heat to loosen it, get another bolt, and put it back in. you dont want to be in an accident without all the bolts, I feel like it would end badly. I did the same thing with mine, and it took no more than an hour to fix it right. Just make sure you keep the drill bit lubed.
|
Drill and new bolt, pretty easy solution
|
All times are GMT -5. The time now is 11:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands