When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Love the progress! On the exhaust point - will the exhaust come out the back or side/elsewhere?
It's going to come out toward the side but still in front of the firewall. The body and chassis lay flat on the ground so no room to run anything under it lol.
Hey how’s it going with this one? Very curious as it’s so out of the ordinary.
It's moving a little slow at the moment. Have a customers car in being built that takes priority. But it does roll now, and I sat the doors on it to see what it looks like with more body metal on it haha
Haven't gotten to much more done but I did get the permanent motor mount made for the right side and the steering box is now mounted and hooked to the column. Also added some reinforcement to the vertical tube the shocks and radiator are mounted to. Clear coated the right side lower control arm and painted that corner of the frame so I don't have to remove the suspension again to do it later. Also got the front shocks and headlights mounted. Ignore the mess of wires lol we are in the middle of insulating another section of the shop and doing some rearranging/organizing.
Made a little more progress since my last post. Still moving slower then I would like but progress is progress lol mounted the trans cooler and made lines for it, made the new manifold for the A/C compressor to use it as my air compressor for the air ride, got the exhaust made, and a handful of other small things all on the front end trying to get it all completed.
Getting some more done here and there. Need more time to get on this thing for more then a hour or two in the evening's Starting on wire tucking the engine Getting the firewall made and mounting the fuel pressure regulator and oil catch can. Getting more of the body put together All my door hinges and my hood hinges are gonna be chains. Yes it has a hood! Haha its about 8" long and thats where all my electronics will be.