Homebrew Jeep Mods
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by ProudXjOwner
This is the one I followed http://www.jeepforum.com/forum/f11/c...p-pics-471962/
Newbie
Joined: Oct 2009
Posts: 5
Likes: 0
Model: Cherokee
e-brake is funtional with drinks. I used a 3" hole saw and a dremel. Yeah Im going to put some metal over it and probably paint it with that textured paint.
CF Veteran
Joined: Aug 2011
Posts: 1,994
Likes: 8
From: San Jose
Year: 89
Model: Cherokee
Engine: 4.0 I6
Originally Posted by 92archerokee
e-brake is funtional with drinks. I used a 3" hole saw and a dremel. Yeah Im going to put some metal over it and probably paint it with that textured paint.
Member
Joined: Apr 2010
Posts: 198
Likes: 0
From: Newport, NC
Year: 1998
Model: Cherokee
Engine: 4.0 L
Hey if this is wrong area please redirect me. thanks.
Smashed turn signal on a wheeling trip a month back and finally got around to replacing it. Ordered some of the clear ones for change from quadratec but when they got here they were ugly as s***. They were chrome on the edges and completly clear so you can see the bulb clear as day through it. I should have looked closer at the picture! I dont want smoked ones where i got the idea of clear ones was a jeep parked here in town. This jeeps were clear but not see through if that makes sense, they had similar transparancy to the front clear parking/turning lights but not so you can see the bulb like the ones that I got. I have a 96' btw.
Anyone know where to find the ones Im talking about. I looked at ebay but didnt see anything.
here is the one i have and dont want http://www.quadratec.com/products/55208_9009.htm
Smashed turn signal on a wheeling trip a month back and finally got around to replacing it. Ordered some of the clear ones for change from quadratec but when they got here they were ugly as s***. They were chrome on the edges and completly clear so you can see the bulb clear as day through it. I should have looked closer at the picture! I dont want smoked ones where i got the idea of clear ones was a jeep parked here in town. This jeeps were clear but not see through if that makes sense, they had similar transparancy to the front clear parking/turning lights but not so you can see the bulb like the ones that I got. I have a 96' btw.
Anyone know where to find the ones Im talking about. I looked at ebay but didnt see anything.
here is the one i have and dont want http://www.quadratec.com/products/55208_9009.htm
Newbie
Joined: Oct 2009
Posts: 5
Likes: 0
Model: Cherokee
Just used the can coozys as a guide and cut as far to front and side as I could without cutting the side out of console. You have to go as close to front as possible because there is not much room left for the back one. I think I had to remove the rear air vent underneat. Cant remember if it runs on that side or not. But it didnt work worth the crap anyway. I used a piece of it to block off the hole where the air comes out. I like how the guy earlier did. He cut into the side of console and put a capped stainless steel tube in. It looks really clean. I might try that next. Only I would set it deeper in and figure something out so the drinks wouldnt rattle arount in the tube.
Member
Joined: Sep 2010
Posts: 220
Likes: 0
From: little rock arkansas
Year: 1999
Model: Cherokee
Engine: High output 4.0L with torque header
Did the cargo bay thing today .... Simple straight forward and easy
Now I don't have to worry about my dogs gettin back there and stepping on my subs all the time .... Just askin to get blown with 100+ lbs dog paw on it.
I'm future adding some drawers too for tools n camping essentials , workin on that next
Now I don't have to worry about my dogs gettin back there and stepping on my subs all the time .... Just askin to get blown with 100+ lbs dog paw on it.
I'm future adding some drawers too for tools n camping essentials , workin on that next
Junior Member
Joined: Feb 2012
Posts: 85
Likes: 0
From: East Coast North Atlantic
Year: 1997
Model: Cherokee
Engine: 4.0
Made a brass inlet tube for my water pump.
Posted a pic and description in the " what did you do to your jeep today"
This is the page https://www.cherokeeforum.com/f59/wh...7/#post1546990
Posted a pic and description in the " what did you do to your jeep today"
This is the page https://www.cherokeeforum.com/f59/wh...7/#post1546990
CF Veteran
Joined: Feb 2010
Posts: 3,869
Likes: 2
From: Allentown, Pa
Year: 1994
Model: Cherokee
Engine: 4.0L HO
Originally Posted by jeepcherokee97
Made a brass inlet tube for my water pump.
Posted a pic and description in the " what did you do to your jeep today"
This is the page https://www.cherokeeforum.com/f59/wh...7/#post1546990
Posted a pic and description in the " what did you do to your jeep today"
This is the page https://www.cherokeeforum.com/f59/wh...7/#post1546990
Junior Member
Joined: Feb 2012
Posts: 85
Likes: 0
From: East Coast North Atlantic
Year: 1997
Model: Cherokee
Engine: 4.0
Yeah, when I got my new water pump it did not come with a new inlet pipe so I used the old one and just resealed it to the new pump. Today it junked out on me (got a rust spot with a small hole and was slowly dripping). I know they make new inlet pipes for just under 8 bucks but its not worth all the work to install it when you can simply make and install a brass one in minutes
Last edited by jeepcherokee97; Feb 17, 2012 at 11:15 PM. Reason: had to edit text