|
1 Attachment(s)
so far my best mod is my exhaust and it sounds freakin sweet ain't heard 1 that sounds like it either but my next fav mod is my homemade "cold" air intake
Attachment 388317 |
Originally Posted by kitsapfreerider
(Post 421287)
Yeah I didn't have the money for this mod but if i did the active control on my bass would greatly help plus my EQ on my head unit would eliminate most external sounds.
I was running a Fender combo half stack, that might have been my problem, took up alot of power |
Originally Posted by bart
(Post 298741)
Installed a custom switch panel over the pointless little cubby under the glovebox. Got switches on there for my aux engine bay cooling, winch and an "Electric aerial isolator" so that I can listen to CD's while in tight woody areas and not worry about breaking my radio mast off. Its got all the aux wiring and relays for my roof lights behind the panel, and also the power supplies for my GPS and TomTom. I made the panel out of ply and covered it with a piece of leather that I had hanging around. Even stuck an old Jeep badge on.
http://i146.photobucket.com/albums/r.../switches3.jpg http://i146.photobucket.com/albums/r...s/P1010146.jpg Also, printed out a set of white backgrounds for my dash.... http://i146.photobucket.com/albums/r.../witedials.jpg http://i146.photobucket.com/albums/r...dialsnight.jpg |
^X2 Looks pretty cool :thumbup1:
|
|
FYI thats not a CAI, its a WAI.
to have a CAI you need to have the filter element isolated from the heat of the engine bay and pulling cold air from outside. |
Originally Posted by TennesseeXJ
(Post 352230)
Rigged up my factory electric fan. If the key is on, the fan is on
http://i249.photobucket.com/albums/g...m/100_0122.jpg http://i249.photobucket.com/albums/g...m/100_0124.jpg http://i249.photobucket.com/albums/g...m/100_0123.jpg So it looks like you just grounded that pin and re-installed the relay? |
Originally Posted by zr2toxj
(Post 439062)
So it looks like you just grounded that pin and re-installed the relay?
Pretty much. Works great. Havnt had an overheating problem since. I took it out in the winter though |
Originally Posted by qdw2008
(Post 421394)
best one ive seen sucks that you sold it
The guy mentioned that he sold it and it sounded like it had the ultimate demise there after. I want to know how screwed up it got. :lol: |
Originally Posted by ZachsXJ
(Post 431142)
FYI thats not a CAI, its a WAI.
to have a CAI you need to have the filter element isolated from the heat of the engine bay and pulling cold air from outside. |
1 Attachment(s)
Got tired of bashing my rockers and I'm too lazy to build sliders so I bolted on 1/4" angle. Works great even with a hi lift. Bolted thru body under plastic door guards and filled it with foam. Oh yeah swapped out the axles as well.
|
Marc I bet your neighbors LOVE you hahaha
|
3 Attachment(s)
The only mod I have pictures of on me at the moment.
New step plates made out of some left over diamond deck. Attachment 388306 Attachment 388307 Attachment 388308 GREAT THREAD! |
As a matter of fact they love me. It sat like that from October till the first of January. My wife was the one I had the most trouble with.
|
Originally Posted by xjmarc
(Post 441032)
As a matter of fact they love me. It sat like that from October till the first of January. My wife was the one I had the most trouble with.
Haha nice. Wherebouts in soddy you at? Im in RedBank |
| All times are GMT -5. The time now is 03:30 PM. |
© 2026 MH Sub I, LLC dba Internet Brands