Home brew cb mount
03-15-2013, 05:28 PM
#1
CF Veteran
Thread Starter
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Home brew cb mount
I took a 16ga nail guard that was 18.5" long and 6" wide and made a cb mount out of it. All I did was mark the center and line the radios center up mark the sides of the cb and added a 1/4" to each side.
Bent it at these line then bend the remaining metal over the top of the cb.
Drilled 4 holes and mounted not to bad for a first go now I just gotta make a holder for my mic. Ill post that up as well when I get it all done. What yall think.
Bent it at these line then bend the remaining metal over the top of the cb.
Drilled 4 holes and mounted not to bad for a first go now I just gotta make a holder for my mic. Ill post that up as well when I get it all done. What yall think.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-28-2020 05:48 PM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-05-2015 06:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)