96 Cherokee

I'm wanting to build a front bumper with the 3/4 shackles and a receiver. Anyone have any specs I could use to build one?

kyledye25

I want to build my own as well. I also need specs. No one has exact measurements at all? And a picture or two?

Sent from my DROID INCREDIBLE using Cherokee Forum

no rdplz

This was my original design before tweaking it some more. The mounts are 33" apart. Fender to fender is 60" I think. A total bumper width of 64" matches TJ flares exactly, so 62" would probably match up with stock flares.
bumpertop_front.gif?t=1293432157

OttawaXJ

I think he wants something without a winch. Better approach angle.

no rdplz

widths would still be the same. Just change the height and depth measurements if that's the case. That design is the only picture I have that has the measurements included.

96 Cherokee

Thanks for the pic and the measurements. Is there any special way for the d ring mounts? I read that you have to weld them to the bumper brackets too? But I don't know it thats right.

Luke Tunstall

You said tj flares the 62" is foe the Cherokee with the stock flares?

PatBlue08

That post was from 2011.

Rogue4x4

No matter.

Grab some cardboard, a sharpie, a tape measure, and get crack-a-lackin, lol

vulcan96

When Mocking a new bumper or anything for that matter, I like to use foamboard of the same thickness as the steel I plan to fab with. It helps get better measurements, and fitlment. Just my 02