Custom Sway Bar Disconnects.
#76
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I agree with you. I think these are now up to par and have all the glitches/worries sorted out.
Anyone see anything else i should address?
Anyone see anything else i should address?
#78
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
What lift do you currently have? Just let me know when you want a set and i'll get them over to you pronto. Haha.
I'll knock $10 off for you and anyone else who had a direct impact on sorting through all the troubles and improvements on these.
I'll knock $10 off for you and anyone else who had a direct impact on sorting through all the troubles and improvements on these.
#79
CF Veteran
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Im sitting at 3" right now. Planning on shackles in the rear poly spacer up front here soon. If I get these from you with my current lift can I just get you to cut a new piece when I go up to 6"? Have you figured out a way to hold the discos and sway bar out of the way when they are disconected?
Last edited by Slim357; 04-21-2013 at 07:55 PM.
#80
Member
Join Date: Sep 2009
Location: Colorado Springs, CO
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Sweet. Yeah, that definitely looks better. I think they should work out well. Time will tell how those D30 SB mounts hold up, but they are certainly a known weak point, no matter who's end links are on them.
Thanks for the discount offer, but actually, they wouldn't work with my modified mounts. Plus, I am looking at either swapping in a Rubicon auto-disconnect SB, or building one of my own. But, happy to help, hopefully it was helpful.
I have larger problems to deal with on my rig right now anyway, finally found the reason my handling has gotten so scary lately. Both of my body-side shackle mount holes are elongated to about 2" long, and the pass side is also cracked. Explains why about half the time, going around a corner, it feels like the suspension just collapses. Because it pretty much is. Time to tear it all out, fab some repair mounts, and do some more welding...
Thanks for the discount offer, but actually, they wouldn't work with my modified mounts. Plus, I am looking at either swapping in a Rubicon auto-disconnect SB, or building one of my own. But, happy to help, hopefully it was helpful.
I have larger problems to deal with on my rig right now anyway, finally found the reason my handling has gotten so scary lately. Both of my body-side shackle mount holes are elongated to about 2" long, and the pass side is also cracked. Explains why about half the time, going around a corner, it feels like the suspension just collapses. Because it pretty much is. Time to tear it all out, fab some repair mounts, and do some more welding...
#81
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Here's an update on them.
After not disconnecting them for about two months with mild wheeling they're holding up perfectly. Nothing is bent out of shape, they still disconnect perfectly, no bent lower mounting brackets, etc etc.
100% in-tact and functional.
After not disconnecting them for about two months with mild wheeling they're holding up perfectly. Nothing is bent out of shape, they still disconnect perfectly, no bent lower mounting brackets, etc etc.
100% in-tact and functional.
#82
CF Veteran
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Sweet. Yeah, that definitely looks better. I think they should work out well. Time will tell how those D30 SB mounts hold up, but they are certainly a known weak point, no matter who's end links are on them.
Thanks for the discount offer, but actually, they wouldn't work with my modified mounts. Plus, I am looking at either swapping in a Rubicon auto-disconnect SB, or building one of my own. But, happy to help, hopefully it was helpful.
I have larger problems to deal with on my rig right now anyway, finally found the reason my handling has gotten so scary lately. Both of my body-side shackle mount holes are elongated to about 2" long, and the pass side is also cracked. Explains why about half the time, going around a corner, it feels like the suspension just collapses. Because it pretty much is. Time to tear it all out, fab some repair mounts, and do some more welding...
Thanks for the discount offer, but actually, they wouldn't work with my modified mounts. Plus, I am looking at either swapping in a Rubicon auto-disconnect SB, or building one of my own. But, happy to help, hopefully it was helpful.
I have larger problems to deal with on my rig right now anyway, finally found the reason my handling has gotten so scary lately. Both of my body-side shackle mount holes are elongated to about 2" long, and the pass side is also cracked. Explains why about half the time, going around a corner, it feels like the suspension just collapses. Because it pretty much is. Time to tear it all out, fab some repair mounts, and do some more welding...
#83
Newbie
custom-sway-bar-disconnects
Are these disconnects still available for purchase?? I was thinking of building the exact same thing untill i stumbled upon these!
#84
Thread
Thread Starter
Forum
Replies
Last Post
MrPerez
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-17-2015 03:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)