14-bolt build for MJ
5 Attachment(s)
I'm finally starting on my 14 bolt build for the rear of my MJ.
Scored 2 of these from my shop for $100. both with fresh rebuilds (some years ago). going to set it up with anti wrap leaf spring perch's. 5.13 gears, Grizzly locker, HD diff cover, Shave bottom of housing, Pinion guard, Disc brakes, truss and possibly a traction arm. Attachment 275441 Attachment 275442 Brand new 3.73 gears... Not gonna do me much good... Attachment 275443 Shiny parts are always nice to see :D Attachment 275444 Attachment 275445 |
What are u gonna run in the front?
|
Originally Posted by XJwonders
(Post 3136307)
What are u gonna run in the front?
|
Originally Posted by adamk
(Post 3136411)
My guess would be the 8 lug 44 in the back ground
|
nice.
are you gonna do the 15 bolt and a shave? |
Originally Posted by adamk
(Post 3136411)
My guess would be the 8 lug 44 in the back ground
|
Originally Posted by adamk
(Post 3136411)
My guess would be the 8 lug 44 in the back ground
Originally Posted by caged
(Post 3136568)
nice.
are you gonna do the 15 bolt and a shave? |
Originally Posted by XJwonders
(Post 3136610)
I don't know, that kinda look like a 60
|
2 Attachment(s)
Old brackets removed and the anti wrap leaf perches welded up. Also removed all the factory HEAVY drum assy's
Attachment 278793 Had to do a little repair work to my factory leaf spring mount(s). Axle isn't "ready" for install yet BUT I did want to check my fitment for the perch's Attachment 278794 Just ordered up the Grizzly locker this weekend, should be here within the next week. Gears and install/setup to come |
Man that rear half looks sick I'm gunna have to go read your build thread lol!
|
Originally Posted by StuckBuck
(Post 3169456)
Man that rear half looks sick I'm gunna have to go read your build thread lol!
Haha thanks :thumbup1: There's a little more tube work where that came from in the build thread... |
4 Attachment(s)
Attachment 279975
Ruffstuff Specialties u-bolts and plates and disc brake adapters Attachment 279976 Barnes4wd 3/8" cover and 3/8" pinion guard Attachment 279977 Chop Chop Attachment 279978 |
5 Attachment(s)
Did some final touche's with the grinder to the bottom of the housing and smoothed it all over with a flap wheel. New break rotors installed onto the hubs. Then some paint for the axle and some paint dipping for the pinion support. Mounted it under the jeep with the Ruffstuff u-bolts and plates. Shock mounts will come later on in my build.
Attachment 280079 Attachment 280077 Attachment 280078 Attachment 280080 Attachment 280081 Not afraid to rock a little Pink on this MJ. |
All times are GMT -5. The time now is 02:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands