JeepingDan

Congrats RoyalX! I'll get things set up in the AM.

1999 4.0 (BBK throttle body, MSD wires, Rustys throttle body spacer, Spectra filter, Flowmaster 50 series, Brown Dog mounts, Optima yellow top) AW4, NP231 w/ AA sye and Novak shifter/linkage, BDS tc skid, Quigleys rear driveshaft, Shortened front shaft with Spicer u joints.

Steering:
1.50" DOM, 7/8" Ruff Stuff heims, Parts Mike hi steer arm, Waggy pitman arm, PSC steering box, PSC hyrdo assist ram, JCR steering box spacer, steering box brace, 1.5" DOM track bar with Ruff Stuff 3/4" heims, Clayton track bar bracket

Suspension:
Clayton 6.5" coils, RE 4.5" Leafs (made in usa), RE 1.25" shackle, Liquid Iron relocation brackets, BDS 4 link, Ruff Stuff traction bar (2" dom lower, 1.5" dom upper, 1/4" axle plates 4" shackle, 7/8 heim), bilstein 7100s in front and bilstein 5100s in rear w/ hoop.

Front Axle:
78 F250 HP44, flat top knuckles, RCV shafts, full spool, Warn lockouts with RCV 300m upgrades, 4:88 gears, T&T truss and bracket kit, Ruff Stuff diff cover, Spicer HD balljoints.

Rear axle:
FF60, chromolly 35 spline shafts, disc brake conversion, Ruff Stuff u bolts and plates, full spool, 4:88 gears, Ruff Stuff diff cover.

Armor
JCR stage III sliders, ORS Stubby Winch Bumper (not pictured), Roxolid rear bumper, XRC 10 winch with synthetic line and Draken fairlead, raised gas tank w/ skid.

Wheels/Tires
5- 15x8 3.5bs Pro Comp Rockcrawler steel wheels w/ 37x12.50 Goodyear MTRs

Red82

Congrats! That's one sweet ride.

PingPong

COngrats on winning... Hey you got any pics of the way you mounted your assist ram on the axle... Looking for ideas on my setup.

RoyalXJ

thanks guys. ill see if i can come up with a pic. it mounts perfect in my track bar bracket from my truss.

RoyalXJ

jeepokee95xj

Overlook my ignorance, but if ur usein ur track bar bracket for the assist ram, where's the track bar?

RoyalXJ

its a hi steer bracket so the track bar mounts higher. that means there is an open space under where the tb mounts which makes a perfect mounting place for my ram.

jeepokee95xj

O OK! So, in the pic it's hidden behind the upper steering link that goes to the Pitman arm, right?

RoyalXJ

correct. i set my steering up so the angles were dead on. i got the clayton drop tb bracket he i could drill a new hole where i wanted.

JeepingDan

Ok I'll submit these to the site owners.

We are putting names on these for now on.

RoyalXJ

nice i like the top picture

JeepingDan

I asked jonf to put that one up. Gotta love action shots.

The Blacksmith

pretty sure royal xj is winning in the contest im hosting on jeep forum too lol

it was that jeeps month for sure. good job.

PingPong

Thanks for the response.. Our rigs are set up almost exactly the same... I kinda wish I went with RCV's instead of nitro's and 300m joints... but we know how that goes.

JeepingDan

Yea that's a beef set up he's got. I'd love to do that to mine one day.
That set up prolly pushes boulders turning the wheel lol very nice rig RoyalXJ has. I like it a lot.