Congrats, 1tonXJ. August 2017 COTM Winner
#1
CF Veteran
Thread Starter
Congrats, 1tonXJ. August 2017 COTM Winner
Attachment 397612
Carnage Canyon Buena Vista CO
Attachment 397613
Chinamans Gulch Buena Vista CO
Attachment 397614
meet and greet half finished rig flexing .
Attachment 397615
Flex shot Holy Cross trail CO
Attachment 397616
The top of Cleveland Rock Holy Cross trail...no winch required .
Attachment 397617
Leisurely drive back down Holy Cross after victory over Cleveland Rock
Attachment 397618[/attach]
Rig sitting on 44s ...42pits work better so dropped the 44s.
Front axle-- 79 Dana 60 Full hydraulic steering , Custom modified knuckles , 5.13 , Detroit locker , 4340 inner/outer shafts Yukon Joints, Yukon Hardcore locking hubs , full truss...bla bla bla
Rear axle 14 bolt Detroit 5.13s ,disc brakes, Full Ballistic bottom shave. Artec truss...home built rear back bone, home built diff cover to truss tie in , home built pinion bridge tie into truss.,tubes welded .
4.0 Atlas 5.0 Home built DOM 1/2 wall drive shafts .
Full belly skid subframe
4link rear/Radius arm front
Overkill boatsides
Full exo tied into inner 6 point cage tied into su frame and boat sides ...not bending thus "unibody"
Hd off road full frame plate ...1/4 over that from frame horn to firewall .
Gas tank raised up between unirails ...rails boxed in and a cross member welded in front and rear of tank . Aluminium tank cover to make pretty .
Wheel base stretch to 115
Track width 92ish
I spent close to 800 hours rebuilding this after the initial exo cage work when it was on 40s...the list of actual metal work in that time is too long to list ...easy to say it's no longer a bolt on rig . I still have few hundred more hours to go before it is where it needs to be , but had to wheel it this Summer not work on it .
Carnage Canyon Buena Vista CO
Attachment 397613
Chinamans Gulch Buena Vista CO
Attachment 397614
meet and greet half finished rig flexing .
Attachment 397615
Flex shot Holy Cross trail CO
Attachment 397616
The top of Cleveland Rock Holy Cross trail...no winch required .
Attachment 397617
Leisurely drive back down Holy Cross after victory over Cleveland Rock
Attachment 397618[/attach]
Rig sitting on 44s ...42pits work better so dropped the 44s.
Front axle-- 79 Dana 60 Full hydraulic steering , Custom modified knuckles , 5.13 , Detroit locker , 4340 inner/outer shafts Yukon Joints, Yukon Hardcore locking hubs , full truss...bla bla bla
Rear axle 14 bolt Detroit 5.13s ,disc brakes, Full Ballistic bottom shave. Artec truss...home built rear back bone, home built diff cover to truss tie in , home built pinion bridge tie into truss.,tubes welded .
4.0 Atlas 5.0 Home built DOM 1/2 wall drive shafts .
Full belly skid subframe
4link rear/Radius arm front
Overkill boatsides
Full exo tied into inner 6 point cage tied into su frame and boat sides ...not bending thus "unibody"
Hd off road full frame plate ...1/4 over that from frame horn to firewall .
Gas tank raised up between unirails ...rails boxed in and a cross member welded in front and rear of tank . Aluminium tank cover to make pretty .
Wheel base stretch to 115
Track width 92ish
I spent close to 800 hours rebuilding this after the initial exo cage work when it was on 40s...the list of actual metal work in that time is too long to list ...easy to say it's no longer a bolt on rig . I still have few hundred more hours to go before it is where it needs to be , but had to wheel it this Summer not work on it .
Thread
Thread Starter
Forum
Replies
Last Post
cowboydale
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
06-29-2017 05:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)