Need hepl with my dd "Jetta"
02-18-2011, 06:57 PM
#1
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: WI
Posts: 1,506
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99
Model: Cherokee
Engine: 4.o
Need hepl with my dd "Jetta"
So 95 Jetta III celebration 2.0 5-speed. Sometimes drives just fine. Other times will act like I'm hitting the rev limiter at 2000. When this happens its almost impossible to drive. Here's what makes it odd no codes. Checked typical stuff while running and all through codes. Even picked up JY air box with Mass and 2 other things on it and all seam to work. Don't know VWs at all and am about to scrap this thing and loose way to much. Any help you can give Thanks.
02-18-2011, 07:01 PM
#2
Member
Join Date: Dec 2010
Location: Atlanta
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
check the maf sensor, i know on the one i used to have i installed a cold air intake and i put the maf in backwards, and it was doing exactly what your saying.
02-20-2011, 02:20 AM
#6
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
throttle body.. my friends vw had a lot of junk and dirt inside his... and it did something similiar...
The other friend had a Gti... that the clutch was not fully disengaging.... it would not release from the presure plate making it completely not driveable...
The other friend had a Gti... that the clutch was not fully disengaging.... it would not release from the presure plate making it completely not driveable...
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
billyonemate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-28-2020 04:36 AM
Beams1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
05-04-2015 05:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
