rklettke

Can you identify this?

freegdr

bent control arm pictures to close to tell i do see a flat tire i think...

hankthetank

Lower control arm.

freegdr

http://www.carpartswarehouse.com/car...ntrol_Arm.html

Firestorm500

Did you roll it or hit a big rock? Or both?

rklettke

Does anyone know if the control arms from the earlier model are shared with anything else? There aren't any liberty's in my local junk yard

rklettke

It's my buddies Jeep, he lost control and hit a curb... Then hit a wall lol

Firestorm500

This a actually a Cherokee forum, but I think you should call a Jeep dealer and find out if they ever changed the part number during the time the Liberty was produced.

hbracing13

I actually just replaced a lower arm on a lib not to long ago it was ordered from ebay. Any lib parts are hard to find I see one once in a while in the yards here but they get picked quick. If you bent the arm that bad I would look at the subframe bolt and see what moved where and aligh it back up, get a new control arm and do a somewhat home aligh and get it aligh at a shop.

rklettke

I'm aware, and I own a cherokee... But I'm helping a friend, and seeing how generally people on here are nice, I'd ask here real quick.

rklettke

Thanks, he actually snapped half of it... I'll do some more searching around for a good price on one

lookin2wheel

Most are cool but there are a few that have nothing better to do than make smart remarks. There is a truck and van salvage yard here in Moultrie Ga. *** Truck, Van, and SUV. If you want, PM me with model info, the part you need, and Ill see if they might have one. If so, Ill get it to you for cost of the part plus shippping.

rklettke

I appreciate it, I had him order the part off rockauto, it wasn't too bad compared to the auto stores... But if I need something else to get it done ill let you know