96 chubby S10 oil pump
02-03-2011, 10:09 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Florida
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
96 chubby S10 oil pump
Alright, so the oil pump in my friends
96 S-10 is shot, its a 2wd 4cyl which i think is a 2.2L
Now my question is, do we have to pull the entire motor
to be able to change the pump? this is what im told by pep boys.
or is there a better way to swap the pump?
96 S-10 is shot, its a 2wd 4cyl which i think is a 2.2L
Now my question is, do we have to pull the entire motor
to be able to change the pump? this is what im told by pep boys.
or is there a better way to swap the pump?
02-03-2011, 11:09 PM
#2
Seasoned Member
Join Date: Sep 2010
Location: Chattanooga
Posts: 306
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L I6
To get to the oil pump you have to remove the oil pan. If there is a cross member in the way (not 100% sure) you either have to pull the engine out or remove the engine mounts and then lift the motor up so you have enough clearance to get the pan out.
How do you know it is shot? Check to make sure the gauge is reading properly first.
How do you know it is shot? Check to make sure the gauge is reading properly first.
Thread
Thread Starter
Forum
Replies
Last Post
carverdave
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
02-06-2019 08:55 AM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-07-2015 07:56 PM
Soilman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 07:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)