Oil filter adapter o-ring
 

Today I decided to fix my oil leak(filter o-ring). While I was doing it I took some pics to make a write up enjoy and let me know what you think:

Tools needed: T-60 socket 1/2 wrench and 11/16 wrench.
I used the 1/2 to turn the socket and the 11/16 as leverage.


Attachment 99824


Attachment 99826



Attachment 99827





I started to try to turn it but it didnt budge, so I heated the bolt with a blow torch and it broke loose rather easy after that.



Attachment 99819



Attachment 99820





Then wrench it all the way off and pull it out and throw it up on the work bench and pop the oil o-ring out.



Attachment 99821



Attachment 99823



After pulling off the old ring I cleans the surface of any junk and put the new ring on.



Attachment 99822



Attachment 99825


After putting on the new ring put the adapter back on. But I would recommend removing the filter before installation cause its less weight to handle. Then bolt it back on and snug it up tight put the filter back on check oil level, and then enjoy a none leaking adapter.