Lower Control Arm Caster Shim Template
 

If you've lifted your Jeep then chances are you had to either replace your lower control arms (LCA) or you had to at least adjust your caster. To get the spacers to adjust the caster you can do one of three things. Buy them from the Jeep dealer which they cost $4.00 a pop for a small piece of metal and depending on how many you need it could get expensive. Go to the local junk yard and sweat and swear till you get some off of an expired Cherokee or make your own.

Below is a template so you can make your own If you select print actual size or print at 100% then It should print the same size of the actual shim.

Attachment 395200

Hope this is usefull!