Easy Fix for Broken J-Bolts
In the event that you ever need to replace your fuel tank, you need to remove the J-Bolts. Unfortunately, if you have a rusty jeep (like many do) they most likely either
snap off or you will have to cut them off. So here is a cheaper alternative than buying a J-Bolt from the dealer for $30 a piece (or if you don't have a welder like me). https://cimg6.ibsrv.net/gimg/www.che...0f8c494acf.jpg Original non-broken J-Bolt https://cimg7.ibsrv.net/gimg/www.che...4abd067c28.jpg (1) If you had to break or saw off your j-bolt, it most likely looks like this. https://cimg8.ibsrv.net/gimg/www.che...fbdd8ec936.jpg (2) Easy fix: reuse the "J" style end then either take the broken end of the j-bolt or use a similar thread tube/piping. Next, go to your local Lowes/Home Depot and find the correct thread COUPLER NUT. Basically its a long nut that you can connect two different pieces to. Simply connect the two ends together (placing the fuel strap on the correct side as needed). https://cimg9.ibsrv.net/gimg/www.che...250fe3ab8b.jpg (3) Reuse the original nut-lock washer and simply hang, bolt in, and you're good to go! |
All times are GMT -5. The time now is 05:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands