StudebakerHoch

i recently bought a 94 jeep grand cherokee limited with a 318 v8. the guy that had it before had 31's on it but they didnt fit at all so i dont think he lifted it up at all. i have absolutely no idea what i'm doing with my jeep to be honest.
but i wanna lift it up a little bit and i was wondering if you guys could give me some advice on how high you think i should go and what kind of kit i should buy. and also if theres other things i need to do along with a lift.

thanks alot

nick_n_ii

Are you just going to run the 31's? If so get a 2" BB and you'll be fine..

If you want bigger need tire size to help out..

RRAM

A 2in bb is quite inexpensive and pretty easy to do. I am not sure if you still have to relocate the rear trac bar or not. I put in a spring kit which is replacing all 4 springs with ones 2 in higher. It came with a relocate adapter. I really like the ride it offers, also came with new longer shocks.

StudebakerHoch

i dont know what size tires i'm gunna get the ones he had were old and i ran over a nail on the way home and i couldnt patch it

how big of tires could i run with stock axles

nick_n_ii

33's would be about max...

RRAM

I will say that going to 31 from stock I felt a big difference in power. So going to 33s would really make me think of getting lower gears. But that is me, I hate a vehicle that does not have enough power. Guess that why my dd is a cummins powered truck. Good luck on the decision. It really comes down to what you want and how your going to use it.

StudebakerHoch

yeah i think i'll just run 32's, how high do you think i should lift it up? and who makes the best lift?

nick_n_ii

To clear 32's I had to go 5.5" of lift.. The ZJ has rather small wheel openings.. As for best I'd have to say RE for anything under 8" or I'd go Clayton's...

StudebakerHoch

okay cool, thanks alot!

tsconver

do a front to rear swap, I think that will get you 4.5" if I recall correctly.