valve seals, different in/out?
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Norway
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L I6
valve seals, different in/out?
I got new valve seals, they look the same but there is different color on them, there is 6 black and 6 red. black on ? Should i lube them on the inside (lucas assembly lube) before i mount them? lucas is sticky so maybe that would hold them better in place, since some of my old one wasnt in place when i removed the springs.
#2
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Norway
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L I6
solved, cleaned two of the old one and one was black and one was red, all looked black, but that was old oil/dirt. No1 from front was red.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
carbuff
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-30-2015 11:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)