THINES8

My Gf totalled her 2000 grand cherokee and just bought a 2004 grand cherokee that came with no key fobs but has her old ones from the 2000 can she get them transfered over to the new jeep if so where at??

GI-Jeepin'

Just do it yourself and act like you saved her a bundle. That should get you some Kuddos from her.

Here is the info on how to reprogram it if you don't already know it.

1. Open the driver's door of the vehicle. Leave it open through the programming procedure.
2. Move the mechanical door lock lever to the LOCK position.
3. Insert the ignition key and turn it to the RUN position.
4. Turn the ignition to the RUN position. Within 20 seconds, aim the key Fob at the receiver dome, press and hold the lock button for at least 5 seconds. Once the receiver accepts the programming code the driver's door will unlock.
5. Once the Key Fob has been programmed, additional Fobs (up to 4) may be programmed into the receiver. Within 20 seconds of the previous Fob programming, move the mechanical door lock lever to the Lock position. Aim another Fob at the receiver dome and press the LOCK button for at least 5 seconds. The door lock will cycle again.
6. To lock the programmed codes into the receiver, the ignition must be turned off and back on within 20 seconds after programming the last transmitter's code. At that time, all previous codes are erased from the module.