Trac Bar Rattle
05-29-2012, 04:09 PM
#1
Seasoned Member
Thread Starter
Join Date: Mar 2010
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Trac Bar Rattle
So the bearing that the trac bar bolts up to the frame or whereever it bolts up to has a lot of rattle in it and it is driving me insane...
Is there a replacement bushing for one of those? its an aftermarket adjustable one...if not I ran across this....has anyone done this??
http://www.gibnet.us/JeepMods/trackbar.htm
is this what I need for the above?
http://www.autozone.com/autozone/par...uestid=1411083
Is there a replacement bushing for one of those? its an aftermarket adjustable one...if not I ran across this....has anyone done this??
http://www.gibnet.us/JeepMods/trackbar.htm
is this what I need for the above?
http://www.autozone.com/autozone/par...uestid=1411083
Last edited by matholland; 05-29-2012 at 04:15 PM.
05-29-2012, 07:31 PM
#2
Seasoned Member
Join Date: Jan 2012
Location: Oklahoma
Posts: 280
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Grand Cherokee
Engine: 4.0
Pic? If its on the frame side then it might be a TRE. It depends on the company that made the track bar I know rusty's is a TRE on the frame side but Kevin's offroad is bushing like what you are asking about
05-30-2012, 07:06 AM
#3
Seasoned Member
Thread Starter
Join Date: Mar 2010
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
I have already left for work. But it doesn't screw on like a tie rod end. It look just like the factory end i was just inside of it was te same size bushing as the stocker
Thread
Thread Starter
Forum
Replies
Last Post
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2023 10:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)