swapped motor wont start
#1
Newbie
Thread Starter
Join Date: Oct 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
swapped motor wont start
just swapped a 94 5.2 into my 95 GC 5.2
motor and harness. now with the key on no fuel pump or crank. i can jump the relay and crank the motor. i don't hear the fuel pump when i jump that relay and key on.
when i turn the key i do get an abs and brake light on the dash but no crank. i did initially get the security light but it went away after i unlock the doors.
i do hear relays clicking when i turn the ignition but no crank or fuel pump. any guesses ecu reset, security bypass?
motor and harness. now with the key on no fuel pump or crank. i can jump the relay and crank the motor. i don't hear the fuel pump when i jump that relay and key on.
when i turn the key i do get an abs and brake light on the dash but no crank. i did initially get the security light but it went away after i unlock the doors.
i do hear relays clicking when i turn the ignition but no crank or fuel pump. any guesses ecu reset, security bypass?
#3
Old fart with a wrench
ALWAYS check for damaged or loose wiring after an engine swap. Engine to body ground comes to mind.
Thread
Thread Starter
Forum
Replies
Last Post
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-27-2015 02:09 AM
relcock
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-26-2015 11:16 PM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-24-2015 10:24 PM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-23-2015 12:14 PM
schaferjeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
08-21-2015 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)