skipping the A/C compressor pulley?
#1
Newbie
Thread Starter
Join Date: Aug 2013
Location: Eugene, OR
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 5.2L V8
skipping the A/C compressor pulley?
Hey so i have a bad A/C compressor pulley bearings it is looking like. With the cooler season hitting me i dont really need A/C. My question is if anyone here has ever had a cherokee(ZJ) and bypassed their A/C compressor with a new serpentine belt. If so what was the difference for sizes?
#2
Member
Join Date: Jun 2013
Location: Kansas City, MO
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 5.2L V8
Hey so i have a bad A/C compressor pulley bearings it is looking like. With the cooler season hitting me i dont really need A/C. My question is if anyone here has ever had a cherokee(ZJ) and bypassed their A/C compressor with a new serpentine belt. If so what was the difference for sizes?
#3
Newbie
Thread Starter
Join Date: Aug 2013
Location: Eugene, OR
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 5.2L V8
well some genius who had it before my brother went to take the a/c compressor pulley off with a hammer! You can see the perfect indent of a hammer as it slammed into my outer part of the pulley. I was debating doing a bypass but in my research late last night i decided i am going to go with an A/C bypass pulley till next summer
#5
Newbie
Thread Starter
Join Date: Aug 2013
Location: Eugene, OR
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 5.2L V8
well i wanna run a gatorback belt. plus someone told me that you can have some issues without the replacement pulley. the replacement is only 40 bucks so it aint like a big deal to buy one and use the belts i have now. once i get my gatorback i will have 2 spare then . ty tons for the info though guys
#7
Old fart with a wrench
As far as bypass pulleys are concerned, get a good one. Some of them are really crap and don't last long. I especially don't like the plastic ones with cheap bearings. I had one on my Chevy truck that was aluminum and bolted directly onto the compressor mount. I have no idea who made it because it was installed by the PO.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
4WD4EVER
Modified XJ Cherokee Tech
28
07-28-2023 07:12 PM
pTacRP
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
08-01-2021 12:35 PM
jeepdewd
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
08-02-2016 01:29 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)