reuse new head gasket
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
reuse new head gasket
so pulled everything apart to change the head gasket and on reassembly one of the push rods fell in and i cannot retreieve it from the top so i have to pull the head back off. Can i reuse the new head gasket or once the head was torqued back on the first time i cannot?
thanks
mike
thanks
mike
#3
Junior Member
Thread Starter
Join Date: Nov 2009
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
I couldnt grab it with a magnet. it got wedged in there good (even with the head off i needed pliers to help me pull it out). after looking at the gasket i need to get another new one. i can reuse the new head bolts i put in though correct (2 uses maximum)?
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
10-29-2015 01:49 PM
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
10-05-2015 08:29 PM
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-28-2015 10:26 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)