Replaced front DS--still noisy
#1
Newbie
Thread Starter
Join Date: Nov 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Replaced front DS--still noisy
2000 GC 4.7 V8, 247 T-case, double u-joints...
Jeep was making a howling, whining noise at movement. When I took off the front DS the noise was much less and only between 40-60 mph. I bought a used DS, and after installing it is making the same noise again.
Any suggestions?
Jeep was making a howling, whining noise at movement. When I took off the front DS the noise was much less and only between 40-60 mph. I bought a used DS, and after installing it is making the same noise again.
Any suggestions?
#2
CF Veteran
probably your t-case.
is there any up/down play in the front axle pinion output?
what about the t-case front pinion output?
those 247 cases have a viscous coupling system, and are prone to failure.
is there any up/down play in the front axle pinion output?
what about the t-case front pinion output?
those 247 cases have a viscous coupling system, and are prone to failure.
Thread
Thread Starter
Forum
Replies
Last Post
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)