Pulling dash for blend doors, anything else I should replace?
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Pulling dash for blend doors, anything else I should replace?
The second motor in my XJ blew, so I got myself a 99 WJ with the auto zone control HVAC. Naturally, bad HVAC doors in it - Code 52, 54, and 56 (with associated symptoms). I was looking at the blend doors and recirc doors from blendorstore.com. I got excited when I saw the no-dash-pull doors that also maintained dual zone capabilities. But then I saw their no-dash-pull recirc and it looks like it's stuck whichever position I mount it... so I'm pulling the dash and doing it right.
What else is should I replace while I'm in there? Pass. side blend door motor? The mode doors? The foam gasket surrounding the HVAC unit? I'll probably do the heater core also, as I can't imagine that was replaced ever. The WJ was still rockin' the OEM shocks when I bought it (no pun intended).
What else is should I replace while I'm in there? Pass. side blend door motor? The mode doors? The foam gasket surrounding the HVAC unit? I'll probably do the heater core also, as I can't imagine that was replaced ever. The WJ was still rockin' the OEM shocks when I bought it (no pun intended).
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-15-2022 06:08 AM
Bucko
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-04-2018 09:52 PM
Waynerd
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-25-2015 11:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)