NP242 Speedo gear leak
1 Attachment(s)
So I swapped out for a 242 using the same speedo gear that was in the 249. Never leaked in the 249 now I cant get it to stop.
Tried RTV twice and the original o ring looks in decent shape. Is it true the oring size is 1 7/8-inch Outside Diameter (44mm) 1 9/16-inch Inside Diameter (40mm) 3/32 Wall Thickness (2mm) I am gonna try to get a new one. Does anyone else have any recommendations? Attachment 311593 |
Try a 1/8th O-ring with an 1 7/8 OD and see if it slides in without too much effort. That will give you just a little more compression against the bore. It may work, it may not, but it's worth a try.
|
All times are GMT -5. The time now is 12:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands