New drivers side door help
#1
Newbie
Thread Starter
Join Date: Aug 2014
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
New drivers side door help
I went to pick n pull and got a new door for my 98 zj. I got it on no problem but i don't have the key for the door and the remote wont unlock it. Getting tired of being ghetto and opening the back door and reaching to the front to unlock it. Old internals are bad, so no point in swapping them. Is there anyway to program the door to work with the remote at least? Or can i somehow get a key made without spending 300?
#2
Old fart with a wrench
Welcome to CF!
It's probably the electric lock solenoid in the new door, not the system, especially if the remote unlocks all the other doors. It may be just stuck linkage or a burnt out solenoid.
It's probably the electric lock solenoid in the new door, not the system, especially if the remote unlocks all the other doors. It may be just stuck linkage or a burnt out solenoid.
#3
Newbie
Join Date: Jun 2011
Location: Wasilla. Alaska
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 2.5
If you kept the old door, try swapping out the solenoid, etc. Also check ALL electrical connections inside the door. HTH, Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-16-2015 11:31 AM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-01-2015 03:56 PM
SlickXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-29-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)