Need your opinion...
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: North Carolina
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2
Need your opinion...
I need to put new shocks on my stock 95 Jeep Grand Orvis Limited...
Should I put heavy duty shocks on it or not?
What kind of shocks would u put on it?
Thanks for all the info on this board....
Should I put heavy duty shocks on it or not?
What kind of shocks would u put on it?
Thanks for all the info on this board....
#2
Newbie
Join Date: Apr 2009
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
That all depends on what your going to do with it...Are you planning on keeping on the pavement all the time or doing some off-roading? If you plan on taking it off road I wouldnt go with a stock replacement.
#4
Senior Member
Join Date: Mar 2009
Location: Telford PA
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0L I6
If the shocks are shot then yes. If your keeping it on the road it is going to give you a better ride but it is not really a big deal. Now if your planing to lift it i would wait till u pick the hight of the lift. It is all up to what you want to do with the jeep.
#5
Junior Member
Thread Starter
Join Date: Mar 2009
Location: North Carolina
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2
Thanks guys,
I just want to go off road in decent areas once in a while, and drive on the pavement most of the time.
I had it checked out today the shocks were fine but my problem was the control arms,upper and lower, rubber bushings are wore out, I think I will replace the whole control arms on upper and lower arms...It is only around $128.00 more for the whole arms.
The rubber bushings are more than I thought they would be just by themselves...
Has anyone replaced these arms and how hard is it to change them?
Thanks again....
I just want to go off road in decent areas once in a while, and drive on the pavement most of the time.
I had it checked out today the shocks were fine but my problem was the control arms,upper and lower, rubber bushings are wore out, I think I will replace the whole control arms on upper and lower arms...It is only around $128.00 more for the whole arms.
The rubber bushings are more than I thought they would be just by themselves...
Has anyone replaced these arms and how hard is it to change them?
Thanks again....
Thread
Thread Starter
Forum
Replies
Last Post
flippygirl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
05-05-2015 09:33 AM
88cherokeepyles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-12-2013 09:55 PM
jhinderliter
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
47
09-27-2012 03:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)