need to replace front brakelines
07-19-2013, 01:29 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Norway
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L I6
need to replace front brakelines
Hi, i need to replace my front brake lines, from the ABS pump to the rubber hose. Is all ends double flare or is ABS pump bubble flare? If they are bubble flare, how do i make them? I have single flare and double flare tools. Its a ZJ 1993 4.0L
My flare tools have a pice that is named DIN, is that bubble flare?
My flare tools have a pice that is named DIN, is that bubble flare?
Last edited by pwb; 07-19-2013 at 01:37 PM.
07-20-2013, 05:46 AM
#2
Old fart with a wrench
My 97 ZJ just had double flare fittings, BUT the flare nuts were oversized at the ABS pump. I had to use the old nuts. Other than that, it was a snap.
i only had a 1/4" tube bender, but it worked well. Just bend them slowly.
i only had a 1/4" tube bender, but it worked well. Just bend them slowly.
Thread
Thread Starter
Forum
Replies
Last Post
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)