KOR ROck SLiders Ordered
Woot just ordered a set of rock sliders for the jeep, will post a writeup when I get them. Should be in time for the CNC memorial day trip to coal creek.
Any suggestions on finish? Rattle can black or herculiner? |
Originally Posted by tsconver
(Post 13643)
Woot just ordered a set of rock sliders for the jeep, will post a writeup when I get them. Should be in time for the CNC memorial day trip to coal creek.
Any suggestions on finish? Rattle can black or herculiner? ;) Seriously though what sliders did you end up with? As for color, I'm a fan of rattle can black as its cheap and easy to touch up. |
Originally Posted by Kyle
(Post 13660)
Did you go with JP Fab?
;) Seriously though what sliders did you end up with? As for color, I'm a fan of rattle can black as its cheap and easy to touch up. |
Originally Posted by tsconver
(Post 13665)
I got the Kevins Off Road ones, with the round outer bar.
|
Originally Posted by Kyle
(Post 13670)
Sounds good, be sure to make an install writeup for CF:thumbsup:
|
Originally Posted by BlueXJ
(Post 13834)
Do they go on the same as XJ ones do? Legs to the unibody frame and bolts to the pinch seam? Just wondering never messed with a GC so don't have a clue.:dunno:
|
Here's a few pics of my KOR sliderz...
http://smg.photobucket.com/albums/v4...Q8/WJ/Sliderz/ Guest Pass: WJCraigPics Or, less pics, but a few here as well... https://www.cherokeeforum.com/album.php?albumid=15 The biggest thing I can tell you is PREP WELL before you paint. It may be a real pain, but it'll be well worth it in the long run. These sliders are built well, so measure carefully and then drill your holes. You'll also want to bend (translation: adjust) the tabs before you mount the sliders as well. Some holes are quite tight to drill, but install is pretty straight foreward, and Kevin has good instructions on his website. Anymore questions, just ask, and I'll answer whatever I can! :thumbsup: Later. |
Looks great, thanks for the update.
|
Originally Posted by tsconver
(Post 13643)
Any suggestions on finish? Rattle can black or herculiner?
|
If you are talking to me I am running soft 8's.
|
Originally Posted by Kyle
(Post 14827)
If you are talking to me I am running soft 8's.
If so, I was just curious if UUJ1 had decided on a wheel yet,because he said he was getting some next week I believe... |
Originally Posted by WJCraig
(Post 14828)
What? Oh...are you replying to the other thread about the 3" lift?:confused:
If so, I was just curious if UUJ1 had decided on a wheel yet,because he said he was getting some next week I believe... |
All times are GMT -5. The time now is 08:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands