How to upgrade
#1
Newbie
Thread Starter
Join Date: Mar 2016
Location: Atl. Ga
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
How to upgrade
Have a 96 grand 4.0 with selectrac. Should I put lockers in it or upgraqde to a 99-04 with Quadradrive with factory limited slip in Diffs. but not lock in 4 Hi. Can I swap axles from a quadradrive in to my 96 ?. Can I go to the Quadradrive with Elec. lockers and swap carries/ gears in to my axles?
Trying to improve without breaking the bank.
Trying to improve without breaking the bank.
#2
Old fart with a wrench
Welcome to CF!
First of all, you can't put later axles in your ZJ because the WJ axles are wider and use different wheel stud patterns, plus the control arm brackets are different and the spring pockets are out farther.
About the best you can get is install a lunchbox locker in the rear dif and run with that. Anything else is a waste of time and money unless you're building a trail rig and not a DD.
First of all, you can't put later axles in your ZJ because the WJ axles are wider and use different wheel stud patterns, plus the control arm brackets are different and the spring pockets are out farther.
About the best you can get is install a lunchbox locker in the rear dif and run with that. Anything else is a waste of time and money unless you're building a trail rig and not a DD.
#4
Old fart with a wrench
Well there is that, but I think what you want is Quadradrive II which has the automatic lockers in the axles. What are you planning to do with this ride? I think a properly prepared ZJ with a locker in the rear would handle just about anything but Moab, and probably better than a WJ.
Thread
Thread Starter
Forum
Replies
Last Post
Djc1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
03-17-2016 09:02 PM
iceman88
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
03-17-2016 12:19 PM
jeephume
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-15-2016 09:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)