Fuman Shoo

I had my front stabilizer bar links replaced and subsequently the sway bar bushings. Everything was fine until earlier this year, I started to get a "slight" death wobble (slight meaning as soon as the wobble WANTED to start up, it quieted down very quickly), but didn't rear it's ugly head again until last month. Now, the front end wants to begin the wobble while at speed going over a moderate bump in the road again. Also, I can hear that audible "clunking" sound on the front driver side again.

Looking back to last year, I remember the mechanic telling me I needed the bushings (when I had the stabilizer installed), but also remember him having to go back to the parts store twice because of the wrong size bushings. I figure that the bushings have worn again or were the wrong millimeter size when installed.

I was looking around for the best prices on a set of MOOG bushings, but quickly found out there are 4 different sizes of them: 22mm, 24mm, 26mm, and 28mm. Is there a way I can measure the size I need? Where do I measure? Shouldn't there only be one size for a particular year make and model Grand Cherokee? Anyone have some advice to lend?

Thank you in advance.

Fuman Shoo

*Bump*

38 thread views, but no advice? Anyone...please?