faint knocking
so i just bought a 2001 grand cherokee with a 4.0. i just changed the oil, and now there is a knocking and it sounds like it might be bottom end. there was no metal in the oil or the pan (i resealed the pan the same day i changed the oil). anyone have any ideas? pretty sure its going to need a rebuild or a reman put into it but im hoping someone has some input that doesnt require putting a motor in this thing.
|
If it quiets down some when its warm then it is likely just piston slap. Common.
It could get more serious if a piston skirt breaks but the 4.0 will often run a long time with a bit of piston slap. |
well i work at a ford dealer and am going to bring it in on my day off and see if i can find out exactly what the issue is. ill probably be able to pull the engine and trans out and rebuild them here if they let me keep the jeep in the lot
|
Could be the flex plate knocking also.
|
well sitting under the jeep while its running it sounds like its coming towards the front of the motor. itd be great if it was just the flex plate but i have a feeling its a bit more serious than that.
|
|
unfortunately i dont think a handfull of sawdust is gonna fix this one lol
|
Originally Posted by marklar134
(Post 3325867)
unfortunately i dont think a handfull of sawdust is gonna fix this one lol
I was actually thinking that maybe it had the sawdust in before and you just drained it all out :icon_eek: |
well the oil was real dark but didnt see any metal, i also resealed the pan and there wasnt any metal (or sawdust) in it either, i think im just going to spring for a full rebuild kit for the engine and the trans
|
ordered an engine and a trans rebuild kit.
|
Is there any possibility that the pan re-seal got the crank to tapping on the pan? Like with a too thin gasket?
|
theres a cradle-type plate (i dont know chrysler terminology) between the crank and the pan, and i used a mopar gasket from the jeep dealer next door and i felt the pan from front to back and i didnt feel any contact.
|
3 Attachment(s)
found my knock, piston number 6. all the journals look good and cylinders dont have any gouges and you can still see crosshatching, gonna take some measurements today and hopefully start throwing it back together.
Attachment 305813 Attachment 305814 Attachment 305815 |
Are you not going to rebuild it being it's that far apart, sure is a good time to do so if the rest of the Jeep is in good condition.
|
i took it apart because im rebuilding it, im also overhauling the trans
|
All times are GMT -5. The time now is 01:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands