EP27 flasher makes a constant clicklng sound when installed (key on)
 

My 95 ZJ Limited, the right directional was flashing faster than normal than so I purchased a new EP27 flasher thinking perhaps there a problem with the s oem grey flasher relay.

After installing the EP27 flasher relay the right and left directional are flashing normally however the EP27 flasher when installed (key on) makes a constant clicking sound, so I had to remove it and install the old OEM grey flasher relay. With the original OEM flasher installed the right directional flasher is faster than normal.

I purchased two EP27's and both start to make a clicking sound when installed (ign. key on).

I'm wondering if I should try a different brand EP27 or a different flasher? I believe Mopar no longer manufactures the stock oem flasher.

Perhaps I should look around for a used oem flasher?

I did check the bulbs a while back and all seem to be ok.

I found an EP39 relay that's similar to the EP27 only it's designed to be installed in a 1994-1998 Jeep Grand Cherokee with VIC

EP39 - http://novitatech.com/?q=aftermarket...-flashers/ep39

EP27 - http://novitatech.com/?q=aftermarket...-flashers/ep27

Flashers: http://novitatech.com/?q=aftermarket...ronic-flashers