dana 35
09-24-2012, 06:39 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
dana 35
Its been a while since ive been on here i just picked up a 94 gc limited with a 5.2 this is the 2nd zj ive had it has a few problems but the main one is the rear its noisy. i looked at it and pulled the cover some metal in the oil ring and pinion seem fine i was expecting a dana 44 but its a 35 with a 3.73 gear ratio do the axle bearings go bad in these or should i just replace all the bearings. im just goona use this as a daily driver,
09-24-2012, 07:10 PM
#2
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Yeah, the axle bearings go bad in those. With all you need to replace, it might be cheaper to just replace the whole axle with either another ZJ D35, or try and get a D44a and driveshaft from a later V8 ZJ. JMO
Last edited by ol"blue; 09-24-2012 at 07:12 PM.
09-24-2012, 10:31 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
Im gonna get it on jack stands and check it out better if its just axle bearings it would be cheaper to fix about the cheapest i could get one for is $200 bucks,
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)