Changing Alternator on 98ZJ
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Location: PA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 4.0 6 cylinder
Changing Alternator on 98ZJ
How hard is it to change an alternator on a 98 ZJ 4.0? I've changed one on a Wrangler and Mountaineer before, but my ZJ is sitting on the side of the highway and I didn't even look under the hood before I left in disgust.
#3
Junior Member
Thread Starter
Join Date: Sep 2011
Location: PA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 4.0 6 cylinder
Hmmmm yeah, didn't even think to do that. I got it done with the help of a friend. Not horrible, but a bit of a pain on the side of a highway when it was 40 degrees and you're truing to beat darkness. Nothin like numb fingers and tiny nuts and bolts!
#5
CF Veteran
Join Date: Sep 2010
Location: Mercer County, NJ
Posts: 12,692
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by adkdremn
Hmmmm yeah, didn't even think to do that. I got it done with the help of a friend. Not horrible, but a bit of a pain on the side of a highway when it was 40 degrees and you're truing to beat darkness. Nothin like numb fingers and <b>tiny nuts</b> and bolts!
#6
Old fart with a wrench
I did mine from underneath. Hard to do on the side of the road.
Trending Topics
#8
Newbie
Join Date: Nov 2012
Location: Baltimore, MD
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 4L I6
I went from underneath as well. It was pretty darn easy. It's somewhat near the exhaust if I remember correctly, so make sure things have cooled if you go that route.
#9
Old fart with a wrench
My 97 ZJ was under the battery and I didn't want to take it out.
#10
Seasoned Member
Join Date: Aug 2012
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 4.0
I replaced mine from underneath. I just turned my wheel a little to the left and tgat about it. Only problem i had was having to use a round file in the pressed in bolt shround for the top bolt since the reman tech didnt check the diameter. Anyway 220a and im happy.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
Bankerburt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)