Caliper help. Jeep on jack
#2
Just That Awesome
Join Date: Oct 2010
Location: Hannibal, MO
Posts: 1,673
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0
been there, done that. He needs to spray pb blaster, white lithium, brake cleaner etc etc on it and beat it with a rubber mallet. Without some kind of solvent and vibration it won't come out. If that doesn't work heat it CAREFULLY with a torch.
#3
Senior Member
Join Date: Nov 2009
Location: Delaware county PA
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
This ^^^
Also when heating with the torch heat around the bolt not on it. Also try a big *** pipe on the wrench.
Good luck
Also when heating with the torch heat around the bolt not on it. Also try a big *** pipe on the wrench.
Good luck
#5
Newbie
Thread Starter
Join Date: Feb 2011
Location: Ok
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96
Model: Cherokee
Ok got it off, but didn't solve my problem.
Symptoms are wobble at 45-50 mph and slight pull to left.
What we have done
Just replaced caliper bracket it had a stuck glide,
Had alignment and balance,
Did brake job,
Replace tire rod end.
Any ideas it is driving me crazy !!!!
Symptoms are wobble at 45-50 mph and slight pull to left.
What we have done
Just replaced caliper bracket it had a stuck glide,
Had alignment and balance,
Did brake job,
Replace tire rod end.
Any ideas it is driving me crazy !!!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-23-2015 06:27 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
jghaenlein
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-27-2015 07:07 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)